– Getting Started & Next Steps

Standard Colors for Your Underground Utilities

It is now easier to know what an underground utility line is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Today, the risks have been lessened although not completely eliminated. If there is a need to dig the ground, it is very important that the utility lines first be identified. The OSHA requires that utilities underground first be located before digging through a piece of land. You dont want something disastrous to occur. Fatal injuries can happen if underground utility lines are struck. It can also interrupt services in your area where the line is located. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Utility companies can then mark out their respective lines when you call them out.

But, despite the marks, there will sill be accidents. The reality is that there is an incident almost every 6 minutes where utility line are struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. When locating utility lines underground, this machine makes it easy to do so. Companies can locate their utility lines if any property owner calls 811.

Today, utility lines are marked with different colors for easy identification. Here are the colors used for different utilities.

White lines are for proposed excavation sites. Area that will be excavated in the future are marked.

If you see pink lines, they are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

Electric power lines, cable, conduit, and lighting cable use red lines. The color red is perfect for electric works because it is associated with fire and danger.

If you see yellow lines, then they are lines for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Communication, alarm, signal lines, cable, or conduit use orange lines. Blue lines are used for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. Green lines are used for sewer and drain lines. Hitting this line can truly derail any project for a long period of time.

Click here now if you want to learn more about the color coding of utility lines. Click here for more.